QMark AWH3180FNW Electric Wall Heater, 1,800W, 120V/1Ph Features:
The Qmark AWH series electric wall heater is an architectural, heavy duty, fan forced wall heater. The unit is a high capacity wall heater that is designed to be used in commercial and industrial areas and performs exceptionally well in motels, hotels, entryways, stores, public rest rooms, warehouses, and other large and hard to heat areas.
QMark AWH Series Electric Heater Features:
- Steel finned metal sheath electric heating elements with low sheath temperatures provide uniform heat and long service life.
- Closely spaced grille bars discourage insertion of foreign objects and direct air downward to effectively distribute heat and keep floors warm and dry.
- Integral 40-90 degree F range Thermostat for quick installation - separate Thermostat not necessary. The tamper resistant Thermostat is adjustable with a narrow blade screwdriver through the bar grille.
- Thermal overheat protector disconnects power in case of overheating due to accidental blockage.
- Built-in power disconnect switch for added safety during maintenance.
- Built-in fan delay switch energizes fan Motor only after elements are heated...prevents discharge of unheated air. When heat shuts off, de-energizes fan Motor after residual heat has been dissipated.
- Permanently lubricated totally enclosed fan Motor provides long life and low maintenance; gently distributes warmth throughout room area.
- Contemporary steel bar grille with baked enamel finish and satin finished aluminum frame...retains attractive appearance through years of use.
- Closely spaced grille bars discourage insertion of foreign objects and direct air downward to effectively distribute heat and keep floors warm and dry.
- Integral 40-90 degree F range Thermostat for quick installation - separate Thermostat not necessary. The tamper resistant Thermostat is adjustable with a narrow blade screwdriver through the bar grille.
- Thermal overheat protector disconnects power in case of overheating due to accidental blockage.
- Built-in power disconnect switch for added safety during maintenance.
- Built-in fan delay switch energizes fan Motor only after elements are heated...prevents discharge of unheated air. When heat shuts off, de-energizes fan Motor after residual heat has been dissipated.
- Permanently lubricated totally enclosed fan Motor provides long life and low maintenance; gently distributes warmth throughout room area.
- Contemporary steel bar grille with baked enamel finish and satin finished aluminum frame...retains attractive appearance through years of use.
- Available colors are Bronze and White.
- Optional accessory power control relays (24 or 120V holding coil) or pneumatic electric (P/E) switch are available.
- Recess or surface mounts in standard 2" x 4" stud walls. Optional mounting frame required for non-necessed mounting.
- For wall mounting only. Do not install back box closer than 8 inches to floor or adjacent wall. Do not install heater behind towel rack, behind door, in floor, in closet, or in ceiling. See installation instructions for complete details.
- Optional accessory power control relays (24 or 120V holding coil) or pneumatic electric (P/E) switch are available.
- Recess or surface mounts in standard 2" x 4" stud walls. Optional mounting frame required for non-necessed mounting.
- For wall mounting only. Do not install back box closer than 8 inches to floor or adjacent wall. Do not install heater behind towel rack, behind door, in floor, in closet, or in ceiling. See installation instructions for complete details.